Specialty

Overview

 

Pentra-Sil® (AC) is an advanced alkalinity control treatment that reacts with concrete to neutralize its pH levels. Through this permanent reaction, slab sweating and efflorescence is significantly reduced. The lithium silicate in this product also densifies and hardens the surface, increasing abrasion resistance.

  • Reduces sweating and efflorescence

  • Neutralizes the surface and reduces alkalinity

  • Reduces vapor drive that carries alkaline salts to the surface of concrete

  • Densifies and hardens the surface to increase abrasion resistance

  • VOC compliant, may contribute to LEED points (IEQ credit)

Specifications

Application Method: Sprayer

Color: Opaque, dries clear

Coverage Rate:

Machine-troweled: 400-550 ft² per gallon (9.8-13.5 m² per liter)
Broom-finished: 250-350 ft² per gallon (6.1-8.6 m² per liter)

Film-Forming: No

Form: Liquid

Freeze Point: 32ºF (0ºC)

Odor: Slight to none

pH: 11-12

Shelf Life: 1 year in unopened, sealed container

Specific Gravity: 1.05

Total Solids: 7.40%

VOC Content: <50g/L

Overview

 

Pentra-Sil® (C&N) cleans and neutralizes concrete floors that suffer from surface sweating and efflorescence. This treatment stabilizes the alkalinity in concrete surfaces by infusing lithium ions throughout the substrate.

  • Stabilizes, cleans and neutralizes concrete surfaces

  • Helps prevent efflorescence, sweating, and other alkalinity problems

  • Removes fine particles and dust that can reduce shine

  • VOC compliant, may contribute to LEED points (IEQ credit)

 

Specifications

Application Method: Sprayer

Color: Opaque, dries clear

Coverage Rate:

Machine-troweled: 400-550 ft² per gallon (9.8-13.5 m² per liter)
Broom-finished: 250-350 ft² per gallon (6.1-8.6 m² per liter)

Film-Forming: No

Form: Liquid

Freeze Point: 32ºF (0ºC)

Odor: Slight to none

pH: 5-6

Shelf Life: 1 year in unopened, sealed container

Specific Gravity: 1.07

Total Solids: 5.8%

VOC Content: <50g/L

Overview

 

Pentra® (PCF) is a liquid pore and micro-crack filler for concrete grinding and polishing. The reactive treatment mixes with the dust created during concrete grinding to fill pinholes, microcracks and other imperfections in the concrete surface. It cures into a durable surface that will accept colored stains, dyes and hardeners.

  • Fills imperfections during grinding operations

  • Provides superior gloss and reflectivity

  • Accepts color-stains and hardeners more uniformly

  • Helps create a polished surface that is easier to maintain

  • VOC compliant, may contribute to LEED points (IEQ credit)

 

Specifications

Application Method: Sprayer

Color: Opaque, dries clear

Coverage Rate: 300 ft² per gallon (diluted 2:1) (7.4 m² per liter)

Film-Forming: No

Form: Liquid

Freeze Point: 32ºF (0ºC)

Odor: Slight to none

pH: 11-12

Shelf Life: 1 year in unopened, sealed container

Specific Gravity: 1.19

Total Solids: 27.50%

VOC Content: <50g/L

Overview

 

Pentra-Pel™ (SI) is a penetrating lithium stain guard designed for interior or exterior concrete, stone and masonry surfaces. This product creates a protective barrier that resists staining. It densifies, seals, and repels while maintaing breathability and doesn't alter the appearance of the substrate. Pentra-Pel™ (SI) is easy to use and is VOC compliant.

  • Provides a protective barrier that resists staining

  • Hardens, densifies and seals

  • Creates an abrasion resistant surface

  • Protects polished concrete without forming a film

  • Helps prevent freeze/thaw damage

  • Repels water, oil and stains

  • Preserves natural look of the substrate

  • Performs well on natural stone

  • Breathable–allows interior moisture to escape without damaging sealer

  • VOC compliant, may contribute to LEED points (IEQ credit)

 

Specifications

Application Method: Sprayer and microfiber pad

Color: Opaque, dries clear

Coverage Rate:

Polished concrete: 800-1000 ft² per gallon (19.6-24.5 m² per liter)
Machine-troweled: 600-800 ft² per gallon (14.7-19.6 m² per liter)
Broom-finished: 250-350 ft² per gallon (6.1-8.6 m² per liter)

Film-Forming: No

Form: Liquid

Freeze Point: 32ºF (0ºC)

Odor: Slight to none

pH: 11-12

Shelf Life:

Part A: 1 year in unopened, sealed container
Part B: 1 year in unopened, sealed container
Once mixed, use within one week

Specific Gravity: 1.01

Total Solids: 13.1%

VOC Content: <50g/L

Overview

 

Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution that reduces moisture absorbtion and leaves no surface film or discoloration. This lithium-based solution is VOC compliant and easy to apply.

  • Protects against freeze-thaw cycles and de-icing chemicals

  • Reduces scaling and spalling

  • No surface film to peel or wear off

  • Does not alter the coefficient of friction of the surface

  • Will not discolor or change the substrate surface appearance

  • Reduces porosity and increases strength and durability

  • VOC compliant, may contribute to LEED points (IEQ credit)

 

Specifications

Application Method: Sprayer

Color: Green tint, dries clear

Coverage Rate: Broom-finished:150-250 ft² per gallon (3.7-6.1 m² per liter)

Film-Forming: No

Form: Liquid

Freeze Point: 32ºF (0ºC)

Odor: Slight to none

pH: 11-12

Shelf Life: 1 year in unopened, sealed container

Specific Gravity: 1.06

Total Solids: 10.40%

VOC Content: <50g/L

Overview

 

Pentra-Melt™ is a fast-acting de-icer for concrete driveways, sidewalks, ramps, steps, loading docks and decks. This industrial strength formula melts ice on contact as low as -80 degrees Farenheit (-62ºC). It works to separate ice from the surface, allowing for easy removal. Pentra-Melt™ can be used before or after a storm and is non-toxic to plant and animal life. It will not damage the concrete or leave residue.

  • Rapidly cuts through hard packed ice, breaking the bond at the surface

  • Resists re-freezing and early dilution, preventing further ice formation and accumulation

  • Fast acting, long-lasting formula results in fewer applications

  • Non-toxic and non-hazardous to plant and animal life

  • Easy to apply--no special spray equipment needed

  • No mess--will not track or leave residue like common deicers

  • Will not damage surface

  • Does not corrode most metals

Specifications

Application Method: Sprayer

Color: Tan tint, dries clear

Coverage Rate: 400-600 ft² per gallon (9.8-14.7 m² per liter)

Film-Forming: No

Form: Liquid

Freeze Point: -40ºF (-40ºC)

Odor: Slight vinegar-like odor

pH: 5-6

Shelf Life: 1 year in unopened, sealed container

Specific Gravity: 1.1

Total Solids: 27.30%

VOC Content: <50g/L

Pricing

Description                                     Gal Jug          5 Gal Pail          55 Gal Drum          275 Gal Tote

  Specialty Formulas

     1. Pentra-Sil (AC)                         $50.24           $243.10             $2,621.30               $12,743.50 

     2. Pentra-Clean (C&N)                $50.39           $243.85             $2,629.55               $12,784.75 

     3. Pentra (PCF)                             $28.32           $133.50             $1,415.70                 $6,715.50 

     4. Pentra-Pel (SI)                          $69.41           $338.95             $3,675.65               $18,015.25 

     5. Pentra-Shield                           $48.40           $235.90             $2,542.10               $12,347.50 

     6. Pentra-Melt                              $90.14           $442.60             $4,815.80               $23,716.00 

Contact Us
Women Owned Business
Phone: 717-990-8196 Email: Tracy@sealnprotect.com

© 2020 Protective Technology Solutions, LLC Proudly created by Mosaic Marketing