top of page

Sealers & Guards

sg 1 5G_HG.jpg

Overview

 

Pentra-Finish™ (HG) is a high-gloss, fast-drying lithium sealer that creates a microfilm on polished concrete, stone, terrazzo, masonry and other cementitious surfaces. This easy-to-use finish increases shine, enhances color and improves resistance against abrasion and stains. Pentra-Finish™ (HG) generally increases the coefficient of friction on polished surfaces. This non-toxic solution is ideal for integrally colored, dyed and stained polished concrete and is VOC compliant.

  • Prolongs shine of polished concrete

  • Delivers rapid gloss with increased abrasion and stain resistance

  • Keeps dirt and contaminants from penetrating

  • User friendly, dries in minutes with low odor

  • This product will not alter the profile of a surface

  • Forms a protective microfilm that is breathable, hard, and will not peel or flake

  • Reduces maintenance and cleaning costs

  • Re-application is simple and requires no stripping

  • Safe for food contact per SGS Testing (21 CFR 175.300)

  • VOC compliant, may contribute to LEED points (IEQ credit)

Specifications

Application Method: Sprayer and microfiber pad

Color: White, dries clear

Coverage Rate:

1st coat: 1,500-3000 ft² per gal (36.8-73.6 m² per liter)
2nd and subsequent coats: 3000-4000 ft² per gal (73.6-98.2 m² per liter)

Film-Forming: Yes

Form: Liquid

Freeze Point: 32ºF (0ºC)

Odor: Slight ammonia-like odor

pH: 11-12

Shelf Life: 1 year in unopened, sealed container

Specific Gravity: 1.06

Total Solids: 21.40%

VOC Content: <50g/L

sg 2 2G_Pel.jpg

Overview

 

Pentra-Pel™ (SI) is a penetrating lithium stain guard designed for interior or exterior concrete, stone and masonry surfaces. This product creates a protective barrier that resists staining. It densifies, seals, and repels while maintaing breathability and doesn't alter the appearance of the substrate. Pentra-Pel™ (SI) is easy to use and is VOC compliant.

  • Provides a protective barrier that resists staining

  • Hardens, densifies and seals

  • Creates an abrasion resistant surface

  • Protects polished concrete without forming a film

  • Helps prevent freeze/thaw damage

  • Repels water, oil and stains

  • Preserves natural look of the substrate

  • Performs well on natural stone

  • Breathable–allows interior moisture to escape without damaging sealer

  • VOC compliant, may contribute to LEED points (IEQ credit)

Specifications

Application Method: Sprayer and microfiber pad

Color: Opaque, dries clear

Coverage Rate:

Polished concrete: 800-1000 ft² per gallon (19.6-24.5 m² per liter)
Machine-troweled: 600-800 ft² per gallon (14.7-19.6 m² per liter)
Broom-finished: 250-350 ft² per gallon (6.1-8.6 m² per liter)

Film-Forming: No

Form: Liquid

Freeze Point: 32ºF (0ºC)

Odor: Slight to none

pH:11-12

Shelf Life:

Part A: 1 year in unopened, sealed container
Part B: 1 year in unopened, sealed container
Once mixed, use within one week

Specific Gravity: 1.01

Total Solids: 13.1%

VOC Content: <50g/L

sg 3 5G_EXT.jpg

Overview

 

Pentra-Guard® (EXT) is an eco-friendly, exterior sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while enhancing the natural color and shine. This treatment creates a breathable, protective clear coat that is abrasion resistant and will not flake or peel. Pentra-Guard® (EXT) cures quickly and provides a hard, glossy, wet look finish to any exterior cementitious surface. This lithium-based solution is VOC compliant and easy to apply.

  • Enhances the color of concrete, masonry, and stone surfaces

  • Provides premium “wet look” finish

  • Adds durability and protection

  • Rapidly cures with little-to-no-downtime

  • Forms a protective microfilm that is breathable and will not peel or flake

  • Can be reapplied or recoated without stripping

  • Functions as anti-graffiti and stain protection for vertical and horizontal surfaces

  • Reduces maintenance and cleaning costs

  • VOC compliant, may contribute to LEED points (IEQ credit)

Specifications

Application Method: Sprayer

Color: White, dries clear

Coverage Rate: Machine-troweled: 800-1000 ft² (19.6-24.5 m² per liter)
Broom-finished: 300-500 ft² (7.4-12.3 m² per liter)

Film-Forming: Yes

Form: Liquid

Freeze Point: 32ºF (0ºC)

Odor: Slight ammonia-like odor

pH: 11-12

Shelf Life: 1 year in unopened, sealed container

Specific Gravity: 1.08

Total Solids: 29.60%

VOC Content: <50g/L

sg 4 5G_Shield.jpg

Overview

 

Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution that reduces moisture absorbtion and leaves no surface film or discoloration. This lithium-based solution is VOC compliant and easy to apply.

  • Protects against freeze-thaw cycles and de-icing chemicals

  • Reduces scaling and spalling

  • No surface film to peel or wear off

  • Does not alter the coefficient of friction of the surface

  • Will not discolor or change the substrate surface appearance

  • Reduces porosity and increases strength and durability

  • VOC compliant, may contribute to LEED points (IEQ credit)

Specifications

Application Method: Sprayer

Color: Green tint, dries clear

Coverage Rate:

Broom-finished:150-250 ft² per gallon (3.7-6.1 m² per liter)

Film-Forming: No

Form: Liquid

Freeze Point: 32ºF (0ºC)

Odor: Slight to none

pH: 11-12

Shelf Life: 1 year in unopened, sealed container

Specific Gravity: 1.06

Total Solids: 10.40%

VOC Content: <50g/L

sg 5 5G_244_222da6f5-8bf8-4a9c-8d40-55d7

Overview

 

Pentra-Sil® (244+) is a high-performance lithium hardener, densifier and sealer. It is formulated to protect existing concrete against damage from salt, freeze-thaw, moisture and steel corrosion. Pentra-Sil® (244+) reduces chloride ion intrusion, dustproofs, hardens and fortifies the surface. It is easy to use and VOC compliant.

  • Protects against salt and freeze/thaw damage

  • Hardens, densifies and dust-proofs

  • Easy-to-use, low odor, no rinsing required

  • Defense against water and harmful substances

  • Not susceptible to UV damage

  • Breathable--allows moisture to escape without damage to the surface

  • Penetrates--no film to lift or peel off

  • Reduces efflorescence and surface sweating

  • Does not contribute to surface ASR or promote crazing

  • VOC compliant, may contribute to LEED points (IEQ credit)

Specifications

Application Method: Sprayer

Color: Red tint, dries clear

Coverage Rate:

Machine-troweled: 600-800 ft² per gallon (14.7-19.6 m² per liter)
Broom-finished: 250-350 ft² per gallon (6.1-8.6 m² per liter)

Film-Forming: No

Form: Liquid

Freeze Point: 32ºF (0ºC)

Odor: Slight to none

pH: 11-12

Shelf Life: 1 year in unopened, sealed container

Specific Gravity: 1.1

Total Solids: 17.1%

VOC Content: <50g/L

Pricing

Description                                     Gal Jug          5 Gal Pail          55 Gal Drum          275 Gal Tote

Sealer & Guards

     1. Pentra-Finish (HG)                 $116.78         $575.80             $6,281.00              $31,042.00 

     2. Pentra-Pel (SI)                           $69.41         $338.95             $3,675.65              $18,015.25 

     3. Pentra-Guard (EXT)               $114.84          $566.10             $6,174.30              $30,508.50 

     4. Pentra-Shield                           $48.80          $235.90             $2,542.10              $12,347.50 

     5. Pentra-Sil (244+)                      $63.78          $310.80             $3,366.00              $16,467.00 

bottom of page